Fuse 100A, 500 Volt, HRC

Low Voltage Offset Tag Fuse, 100A, 550VAC, HRC, BS88

This low voltage offset tag fuse (or offset bolted tag fuse) is essentially a HRC cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. This British Standard fuse is used within installations as a sacrificial link and is designed to break when a fault occurs, such as an overcurrent or short circuit.

Eaton Bussmann's fuses can be found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. These fuses are specifically designed for the protection of general industrial applications e.g. power distribution, cable protection, motor protection.

The low-temperature rise enables the fuse to be suitable for high-density mounting, and this fuse links has been specifically designed for the protection of equipment and conforms to industry standards.

British Standard Fuse Features

• Current rating 100 A
• Fuse size A4
• Voltage rating 500 VAC
• Fuse standard BS88, IEC 269
• High rupture capacity (HRC)
• Suitable for three-phase applications
• Fixing centres 94mm
• Tag width 14.3 mm, bolted type
• Overall length 109.5 mm
• Fuse dimensions 21 x 58.5 mm
• Standards/approvals – BS88-2, IEC 60269-2