SIGMAPRIME 48 Grey 5177 LTR SIGMA-250781
0 CFA
HT
SIGMAPRIME 48 Grey 5177 LTR SIGMA-250781
Sécurité
La sécurité de votre commande dependra de votre mode de livraison
Livraison
La livraison du prdotui par Allmann Group sera entre 2 à 4 jours
Retour d'article
Au delais d'un delais de 10 jours, les articles ne peuvent plus être retournés après utilisation
- Particularly suitable as a finish for boottop, topside, deck and deck equipment
- A quick-drying, hard, tough, water- and weather-resistant coating with moderate gloss retention
- Can be applied over most intact alkyd paints
- This coating is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions
- Also available with non-skid material (supplied separately) for use on deck surfaces
RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES
Substrate conditions
- Previous suitable coat must be dry and free from any contamination
- Previous coat: surface should be sufficiently roughened if necessary
Substrate temperature and application conditions
- Substrate temperature during application should not exceed 50°C (122°F)
- Substrate temperature during application should be at least 3°C (5°F) above dew point
- SYSTEM SPECIFICATION
- SYSTEMS FOR BOOTTOP AND TOPSIDE – SYSTEM SHEET 3102
- SYSTEMS FOR SUPERSTRUCTURE AND DECK FITTINGS – SYSTEM SHEET 3104
INSTRUCTIONS FOR USE
- Stir well before use
- The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain
- application viscosity
- Adding too much thinner results in reduced sag resistance
- Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)
Air spray
Recommended thinner
THINNER 20-05
Volume of thinner
10 - 15%, depending on required thickness and application conditions
Nozzle orifice
2.0 – 3.0 mm (approx. 0.079 – 0.110 in)
Commentaires (0)
Aucun avis n'a été publié pour le moment.
SIGMAPRIME 48 Grey 5177 LTR SIGMA-250781