SIGMAPRIME 200 SERI… LTR SIGMA-211291
0 CFA
HT
SIGMAPRIME 200 SERI… LTR SIGMA-211291
Sécurité
La sécurité de votre commande dependra de votre mode de livraison
Livraison
La livraison du prdotui par Allmann Group sera entre 2 à 4 jours
Retour d'article
Au delais d'un delais de 10 jours, les articles ne peuvent plus être retournés après utilisation
PPG Sigma SigmaPrime 200 is a two component, multipurpose, polyamide, anti-corrosive coating for use as the priming undercoat in epoxy paint systems.
SigmaPrime 200 offers excellent adhesion to steel, shop primers, galvanised steel and non-ferrous metals, giving them good adhesion, excellent abrasion, impact and chemical resistance. It is suitable for use in all vessel areas.
SigmaPrime 200 works well in a wide range of climatic conditions, cures well in extreme conditions and temperatures, and provides the ultimate protection from water damage and corrosion in industrial and coastal/marine environments.
SigmaPrime 200 comes in a grey or yellow-green, eggshell finish.
Application (at 20C):
- Stir well before use
- Apply with spray, brush or roller
- Touch dry: 1.5 hours
- Recoatable: 2.5 hours
- Full cure after 7 days
- Coverage: 6.0m2 per litre at 100 microns
- Volume solids: 60%
- Recommended dry film thickness: 100-200 microns per coat
- Recommended thinner: 91-92 (no thinner needed for brush/roller)
Commentaires (0)
Aucun avis n'a été publié pour le moment.
SIGMAPRIME 200 SERI… LTR SIGMA-211291