Resist 86 Gray (Résiste 86 Gris)

Jotun Resist 86 is a two component moisture curing inorganic zinc ethyl silicate coating. It is a fast curing, very high zinc dust containing product that provides excellent corrosion protection as a single coat or as part of a complete coating system. Heat resistant up to 540°C.

Best Uses

Jotun Resist 86 conforms to the compositional requirements of SSPC paint 20, level 1, ISO 12944-5 and AS/NZS 3750.15 1994. It provides excellent corrosion protection as a single coat or as part of a complete coating system. It is heat resistant up to 540°C (1004 °F). To be used as primer in a coating system and as single coat system in atmospheric environments. Suitable for properly prepared carbon steel substrates only. This product complies with ASTM D520 type II zinc dust.

Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer for coating systems where extended durability is required.

Application

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. For carbon steel, prepare to Sa 2.5 with a surface profile of Fine to Medium G. Apply using air spray or airless spray. Brush is recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness. In order to avoid settling of heavy zinc, continuous mechanical stirring during application is recommended.