ACRI 700 FINISH BLUE CS-643

ACRI 700 FINISH is a finishing coat based on acrylic resin and drying by evaporation of the solvents

It has excellent adhesion property, weathering resistance and gloss and colour retention.
TECHNICAL DATA
Type : Acrylic Finish paint
Recommended Use : Finishing coat on ship's topside, superstructure
Colour : As specified
Flash Point : 27 °C
VOC : 550 [g/litre] EPA Method-24
Solid by Volume : 37.0 ± 2%
Coverage (Theoretical) : 0.08 - 0.11 ; 12.3 - 9.25
Wet Film Thickness : 3.24 - 4.32 ; 81 - 108 microns
Dry Film Thickness : 1.20 - 1.60 ; 30 - 40 microns
Drying Time : Temperature 20°C 30°C 40°C
(at D.F.T. 30 microns) : Surface Dry 8 mins.
: Hard Dry 2 hrs.
Painting Interval : Minimum 4 hrs.
(at D.F.T. 30 microns) : Maximum -
Thinner : CMP-11
Method of Application : Airless spray , Roller , Brush
Conditions of Application : Temperature Minimum 10°C
Humidity Maximum 85% RH
For Airless spray :
Tip No. GRACO 719
Paint output pressure 12 - 14 MPa.
Viscosity 40 - 60 sec (Ford Cup No.4)
Thinning 0 - 15 % by volume
Preceding coats : Acri 700 Primer , Multix Primer , Epoxy Primer, etc.
Subsequent coats : -
Shelf life at 25°C : In unopened container 24 months