Installation of the Crane Wire.

The method of installing the wire rope is shown in Figure 16-2

When winding the wire rope (main hoisting rope, secondary hoisting rope) around the crane reel, care should be taken to avoid twisting or kinking.

（1） Pass the rope end of the new wire rope through the top end of the boom.
When the main hoisting rope and the secondary hoisting rope are to be replaced, the secondary hoisting rope should be installed first.

（2）Pass the wire rope through the wire rope fixing hole of the reel, as shown in the figure above, then insert the rope end into the hole from the opposite side and install the wire rope on the reel.
At this time, the wire rope should be installed on the reel。

（3）Leave the length of the hook attached and slowly wind the rest of the wire rope around the drum.
In order to make the wire rope neatly wound on the drum, it is necessary to pull it tightly.

（4）Attach the hoisting rope to the rope end wedge cover, see Figure 16-3