FAP 076, PENGUARD UNIVERSEL ALU 20L

Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that can be used as primer, mid-coat, finish coat or as single coat system in atmospheric and immersed environments. Can be applied down to -10°C.

Best Uses

Jotun Penguard Universal is a fast drying, abrasion resistant, high solids, high build product. It provides excellent corrosion protection as part of a complete coating system. Can be used as primer, mid-coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, shop primed steel, stainless steel, aluminium and concrete substrates. Suitable as maintenance coating on a wide range of aged coating surfaces. Jotun Penguard Universal can be applied at sub-zero surface temperatures.

Jotun Penguard Universal is recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Approved for PSPC cross over testing with a wide range of shop primers.

Application

Preparation

• Carbon steel - Sa 2½ (ISO 8501-1)
• Aluminium - Abrasive blast cleaning to achieve a surface profile using non-metallic abrasive media which is suitable to achieve a sharp and angular surface profile.
• Galvanised steel - Sweep blast-cleaning using non-metallic abrasive leaving a clean, rough and even pattern.
• Stainless steel - Abrasive blast cleaning to achieve a surface profile using non-metallic abrasive media which is suitable to achieve a sharp and angular surface profile.
• Shop primed steel - Sweep blasted or alternatively blasted to Sa 2 (ISO 8501-1) of at least 70 % of the surface.
• Coated surfaces - Sa 2½ (ISO 8501-2)
• Concrete - Minimum 4 weeks curing. Moisture content maximum 5 %. Prepare the surface by means of enclosed blast shot or diamond grinding and other appropriate means to abrade the surrounding concrete and to remove laitance.