HEMPATHANE TOPCOAT 55210, BASE 55219 / RED 50800 - PER LITER

Hempel Hempathane Topcoat 55210 is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention for use onto structural steel in severely corrosive environments.

Best Uses

Hempel Hempathane Topcoat 55210 is recommended as a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention is required.

Application

Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Minimum temperature for curing is: -10°C/14°F. At the freezing point and below be aware of the risk of ice on the surface, which will hinder adhesion. The film formation may be adversely affected by light rain, high humidity and/or condensation during application and the following interval after application: 10 hours , 20°C/68°F In confined spaces provide adequate ventilation during application and drying.