45 Deg Elbow 1- 3/4 Inch Long Radius

Product Features:

Long Radius 45° Elbows make a 45-degree change of direction in the run of the pipe. The radius of the bend in this elbow is "long radius", or in other words, greater than that of the nominal size.

Materials:

• A234 WPB - The standard specification for piping fittings of wrought carbon steel and alloy steel for moderate and high temperature.

Description ASTM A234 WPB is the Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service. Specifications ASTM: A234 WPB ASME: B16.9, B.11 NACE: MRO175 MSS: SP-83, SP-95

1. Fittings made from bar or plate may have 0.35 max carbon. 2. Fittings made from forgings may have 0.35 max Carbon and 0.35 max Silicon with no min. 3. For each reduction of 0.01% below the specified Carbon maximum, an increase of 0.06% Manganese above the specified maximum will be permitted, up to a maximum of 1.35%. 4. The sum of Copper, Nickel, Niobium, and Molybdenum shall not exceed 1.00%. 5. The sum of Niobium and Molybdenum shall not exceed 0.32%. Tensile Requirements Tensile Strength: (KSI) = 60 Yield Strength: (KSI) = 35 (KSI converts to MPA {Megapascals} by multiplying by 6.895) Typical Application • Pressure Piping • Pressure Vessel Fabricat