Sigma Dur 550 Topcoat White Hardener
0 CFA
HT
Sigma Dur 550 Topcoat White Hardener
Sécurité
La sécurité de votre commande dependra de votre mode de livraison
Livraison
La livraison du prdotui par Allmann Group sera entre 2 à 4 jours
Retour d'article
Au delais d'un delais de 10 jours, les articles ne peuvent plus être retournés après utilisation
PPG Sigmadur 550 H (formerly known as Sigmadur 568), two-component, high solids, high-build aliphatic acrylic polyurethane finish available in 2,300+ colours from RAL, NCS and BS.
The finish has excellent resistance to atmospheric exposure conditions with good colour and gloss retention, resisting splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals.
Applies directly to metal and can be recoated even after long atmospheric exposure, curing at temperatures down to -5°C (23°F).
Features & Benefits
- Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours
- Excellent resistance to atmospheric exposure conditions
- Good colour and gloss retention
- Cures at temperatures down to -5°C (23°F)
- Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals
- Can be recoated even after long atmospheric exposure
- Good application properties by airless, brush and roller
- High film build-up to 150 µm (6.0 mils) for one coat
- Can be applied direct to metal
- Drying and curing times can be reduced significantly using PPG 866M ACCELERATOR
Product Data
Two-component, high solids, high-build aliphatic acrylic polyurethane finish
| Data for mixed product at 20°C (68°F) | |
|---|---|
| Number of components | Two |
| Mass density | 1.5 kg/l (12.5 lb/US gal) |
| Volume solids | 70 ± 2% |
| VOC (Supplied) | Directive 1999/13/EC, SED: max. 220.0 g/kg |
| max. 330.0 g/l (approx. 2.8 lb/US gal) | |
| UK PG 6/23(92) Appendix 3: max. 259.0 g/l (approx. 2.2 lb/US gal) | |
| Recommended dry film thickness | 50 - 150 µm (2.0 - 6.0 mils) depending on system |
| Theoretical spreading rate | 14.0 m²/l for 50 µm (561 ft²/US gal for 2.0 mils) |
| 9.3 m²/l for 75 µm (374 ft²/US gal for 3.0 mils) | |
| Overcoating Interval | Minimum: 8 hours |
| Maximum: Unlimited | |
| Shelf life | Base: at least 36 months when stored cool and dry |
| Hardener: at least 24 months when stored cool and dry | |
Commentaires (0)
Aucun avis n'a été publié pour le moment.
Sigma Dur 550 Topcoat White Hardener