PPG Sigmarine 48 is a general purpose gloss paint based on an alkyd-modified resin that is particularly suitable as a finish for boottop, topside, deck and deck equipment. Sigmarine 48 is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions.

Top Features & Benefits

• A quick-drying, hard, tough, water and weather resistant coating with moderate gloss retention
• Can be applied over most intact alkyd paints
• Also available with non-skid material (supplied separately) for use on deck surfaces
• Gloss finish

Preparation & Application

Recommended Substrate Conditions and Temperatures

Substrate Conditions

• Previous suitable coat must be dry and free from any contamination
• Previous coat: surface should be sufficiently roughened if necessary
• Substrate temperature during application should not exceed 50°C (122°F)
• Substrate temperature during application should be at least 3°C (5°F) above dew point

System Specification

• SYSTEMS FOR BOOTTOP AND TOPSIDE – SYSTEM SHEET 3102
• SYSTEMS FOR SUPERSTRUCTURE AND DECK FITTINGS – SYSTEM SHEET 3104

Instructions for Use

Stir well before use. The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity. Adding too much thinner results in reduced sag resistance.